JM 504 : RED INSULATING VARNISH

DESCRIPTION: Fast drying and air cured class 'F' flexible smooth varnish for electrical systems. Protects from dust, moisture, oil and chemical fumes. Prevents, short circuits and flash off. Enhances equipments life. 

APPLICATION: As a finish coat on windings(armatures, stators, coils etc.) which are

exposed to high humidity and chemical fumes. Repairs to worn out insulation. LT and HT insulation, Junction box and panel insulation.

	JM 544 : INSUL COAT

KEY FEATURES :

Solvent free, two components ceramic based epoxy system. Ultra high gloss, wear and chemical resistance coating prevents anti tracking and provides life time protection to bare conductors.

Brushable and easy to apply.

APPLICATION :

Insulation of high voltage conductors. repairs to ceramic and epoxy insulators, bus bar etc.

	JM 513 : PCB COATING

KEY FEATURES :

Clear acrylic conformal coating which protects printed circuit boards from moisture, dust and chemical fumes.

APPLICATION :

Coating to PCB's electronic gauges etc.

	JM 520 : ELECTRIC GRADE PAINT

KEY FEATURES :

Specially formulated rust tolerant paint which does not interface with dispassion of heat.

APPLICATION :

External painting of electrical motors, actuators, transformers,panels junction box etc.

	JM 517 : BOLT PROTECTOR

KEY FEATURES :

Tough zinc rich coating containing rust inhibitor. excellent anti seize property (up to 600 c) excellent chemical resistant (pass, 2000 hr salt spray test.)

APPLICATION :

Protection of nut and bolts against chemical attack in industries like chemical, cement, petrochemicals, fertilizer, marine etc.

	JM 522 : E.H.T. PAINT

KEY FEATURES :

Extra high temperature paint withstand up to 700 C. Protects from rusting and chemical attack. Highly resistance to salt water corrosion.

APPLICATION :

Protection to furnace, heat exchanger, boilers, exhaust fans, oven parts, exhaust manifolds against rusting, chemical attack at high temperature.

	JM 545 : PEEL OFF COAT

KEY FEATURES :

Long term flexible rust and corrosion inhibitor. Based on long lasting synthetic formulation. Long term rust protection (ASTM B-117). Can be easily cleaned and peeled off. Available in different colors.

APPLICATION :

Protection of moulds and dyes, spare parts, machined components, finish inventory, tools, bearings and any components stored before

process.

	JM 528 : GASKET GUARD

KEY FEATURES :

Adhesive non curing gasket sealing and protection compound. Excellent chemical resistance. Doesn't require cleaning. Temp range

O O -42 C to 250 C

APPLICATION :

Sealing and protection of asbestos, PTFE and rubber gaskets.

	JM 531 : CORROTREAT

KEY FEATURES :

Heavy duty rust tolerant co polymer coating. Excellent corrosion and chemical protection (withstands 5000 hrs salts spray).

Availables in all colors.

APPLICATION :

Touch up to repaired surface. Instant coating on site. Preventive coating to welded joints.

	JM 532 : H I COAT

DESCRIPTION : High insulation, fast drying, air cured silicon co polymer coating. High gloss and excellent resistant to dust, water oil and chemicals.

APPLICATION : Insulation of bus bar, cable jointing, insulators, bakelite sheet etc.

where high voltage insulation required.

	JM 512 : BATTERY TERMINAL CLEANER

KEY FEATURES :

Air tight flexible, water proof and acid resistant coating for battery terminals. Does not crack or peel off. Prevents sulfation and corrosion.Prevents current losses and enhances battery life.

APPLICATION :

Flexible coating on Battery terminal where regular cleaning is not feasible.

	JM 523 : CONDUCTIVE SPRAY

KEY FEATURES :

100% dry graphite conductive lubricant which prevents bi-metallic corrosion, arcing, over heating, jamming, loosening of electrical joint. Non flammable coating with excellent temperature resistance (-40 c to 600 c). Performs up to grid voltages.

APPLICATION :

Electrical bi-metalic joints, cable terminations,substation nut bolts breaker conductive edges, heavy duty contactors, bus bar isolators

jaws etc.

	JM 511 : ZINC COATING BRIGHT

KEY FEATURES :

Bright aluminium zinc fortifed coating imparts durable cathodic protection against corrosion. excellent touch up of galvanized substrate highly resistance to salty environment (pass,1500 hr salt

test).

APPLICATION :

Repair of damaged galvanized surface. corrosion resistance coating to most of the equipments subjected to atmosphere.

	JM 538 : SS COAT

KEY FEATURES :

Unique 316 L stainless steel silver gray coating. Excellent chemical, heat and water resistance.

APPLICATION :

Touch up coating to stainless steel structures, joints etc. Anti corrosion coating to parts subjected to corrosive atmosphere.

	JM 537 : RUST INHIBITOR

KEY FEATURES :

Lanonin based long term corrosion inhibitor. It can easily be cleaned by solvent. Available in different color.

APPLICATION :

Low cost corrosion protection to costly equipments, finish inventory, tools, bearings and any components stored before process.

	JM 506 : BELT PROTECTOR

KEY FEATURES :

Protecting coating to rubber components from moisture, dust and chemical fumes. Prevents hardening, heat ageing and cracking of rubber parts. Prevents slippage and increase pulling power and transmission efficiency.

APPLICATION :

Drive belts exposed to heat, humidity and chemical fumes. Protection of rubber components like 'O' ring, gaskets etc.

	JM 516 : WAXI COAT

KEY FEATURES :

Synthetic wax based formulation dries to a waxy elastic film for long lasting protection against atmosphere corrosion.

APPLICATION :

Protection of moulds and dyes, spare parts, machined components, finish inventory, tools, bearings and any components stored before

process.